Shipping Materials
1. Paper Recycling
This shipper box was designed by Soft Services to be sealed with minimal adhesive to make break-down and recycling easy. After opening via the perforated tab, cut off adhesive flap and discard (the sticky adhesive can prevent the carton from being accepted and processed at all facilities). Place the remaining carton in normal curbside paper recycling along with the shipper bag. The entire shipper bag, including the paper string ties, are recyclable.
Shipper Box
100% Cardboard
Recyclable
Shipper Bag
100% Paper
Recyclable
Buffing Bar
1. Paper Recycling
Break down the Buffing Bar carton by unlocking both top and bottom flaps and lay completely flat. Place in normal curbside paper recycling along with the wrapper.
Carton
100% Paper
Recyclable
Wrapper
100% Paper
Recyclable
Carea Cream
1. Paper Recycling
Break down the Carea Cream carton by unlocking both top and bottom flaps and lay completely flat. Place in normal curbside paper recycling with carton liner.
2. Aluminum Recycling
In order to recycle any aluminum bottle, it must first be cleaned. Fill the empty bottle halfway with warm water and dish soap. Seal with either the Locking Pump or cap and shake to clean. Repeat if needed. Follow with a warm water rinse. Tip—you can clean the Locking Pump component at the same time; after shaking, dispense the soapy water by pumping and repeat with clean warm water.
Remove the *gasket from the inside top of the aluminum cap (this is the small white disc placed inside the cap that keeps the Carea Cream from leaking in transit) and discard. Place both the bottle and cap in normal curbside metal recycling.
Carton
100% Paper
Recyclable
Carton Liner
100% Paper
Recyclable
Bottle
100% Aluminium
Recyclable
Cap
*100% Aluminum
Recyclable
Clearing Mist
1. Paper Recycling
Break down the Clearing Mist carton by unlocking both top and bottom flaps and lay completely flat. Place in normal curbside paper recycling.
2. Plastic Recycling
In order to recycle any plastic bottle, it must first be cleaned. Rinse the inside of the bottle with water. Place in normal curbside plastic recycling.
Remove foam gasket from inside cap (tip – use a toothpick). Rinse with water and place in normal curbside plastic recycling.
Carton
100% Paper
Recyclable
Bottle
Plastic containing 50% Post-Consumer Resin
Recyclable
Shipping Cap
Plastic containing 50% Post-Consumer Resin
Recyclable
Comfort Cleanse
1. Paper Recycling
Break down the Comfort Cleanse carton by unlocking both top and bottom flaps and lay completely flat. Place in normal curbside paper recycling with carton liner.
2. Aluminum Recycling
In order to recycle any aluminum bottle, it must first be cleaned. Fill the empty bottle halfway with warm water and dish soap. Seal with either the Locking Pump or cap and shake to clean. Repeat if needed. Follow with a warm water rinse. Tip—you can clean the Locking Pump component at the same time; after shaking, dispense the soapy water by pumping and repeat with clean warm water.
Remove the *gasket from the inside top of the aluminum cap (this is the small white disc placed inside the cap that keeps the Comfort Cleanse from leaking in transit) and discard. Place both the bottle and cap in normal curbside metal recycling.
Carton
100% Paper
Recyclable
Carton Liner
100% Paper
Recyclable
Bottle
100% Aluminium
Recyclable
Cap
*100% Aluminum
Recyclable
Fine Mister
1. Paper Recycling
Break down the Fine Mister carton and liner by unlocking both top and bottom flaps and lay completely flat. Place in normal curbside paper recycling.
2. Mister
The Fine Mister, like almost all similar misters, is made of multiple materials and small parts, which unfortunately makes it non-recyclable. We encourage you to clean and keep the Fine Mister to reuse with future orders of the Clearing Mist.
To clean, fill your empty Clearing Mist bottle with warm water, shake, and spray the solution through the component. Repeat with clean water to rinse.
For more information on the Fine Mister, please see our Reusables page.
Carton
100% Paper
Recyclable
Carton Liner
100% Paper
Recyclable
Mister
Plastic, Steel
Not Recyclable
Locking Pump
1. Paper Recycling
Break down the Locking Pump carton by unlocking both top and bottom flaps and lay completely flat. Place in normal curbside paper recycling.
2. Pump
The Locking Pump, like almost all similar pumps, is made of multiple materials and small parts, which unfortunately makes it non-recyclable. We encourage you to clean and keep the Locking Pump to reuse with future orders of the Carea Cream.
To clean, fill your empty Carea Cream bottle with warm water and dish soap, shake, and pump the solution through the component. Repeat with clean water to rinse.
Carton
100% Paper
Recyclable
Pump
Plastic, steel, glass
Not Recyclable
Smoothing Solution
1. Paper Recycling
Break down the outer carton by laying completely flat. Place in normal curbside paper recycling.
2. Plastic Recycling
In order to recycle any plastic tube, it must first be cleaned of any non-plastic residue. Cut completely across the empty tube at the top, removing the crimped edge. Rinse the inside of the tube with water. Place in normal curbside plastic recycling. Rinse the inside of the cap with water and place in normal curbside plastic recycling.
3. Plastic Recycling
Unscrew the cap to access the small aluminum seal that covers the opening of the tube, peel it off and discard—the size and adhesive makes this highly unlikely to be properly processed in a recycling facility.
Carton
100% Paper
Recyclable
Tube
100% Recyclable
Plastic
Cap
100% Plastic
Recyclable*
Speed Soak
1. Paper Recycling
Break down the Speed Soak carton by unlocking both top and bottom flaps and lay completely flat. Place in normal curbside paper recycling.
2. Plastic Recycling
In order to recycle any plastic tube, it must first be cleaned of any non-plastic residue. Cut completely across the empty tube at the top, removing the crimped edge. Rinse the inside of the tube with water. Place in normal curbside plastic recycling.
Rinse the inside of the cap with water and place in normal curbside plastic recycling.
3. Non-recyclable
Unscrew the cap to access the small aluminum seal that covers the opening of the tube, peel it off and discard—the size and adhesive makes this highly unlikely to be properly processed in a recycling facility.
Carton
100% Paper
Recyclable
Tube
Plastic containing 30% Post-Consumer Resin
Recyclable
Cap
Plastic containing 30% Post-Consumer Resin
Recyclable
Soap Home
Paper Recycling
Disassemble pieces and place in normal curbside paper recycling.
Outer Box
100% Paper
Recyclable
Inner Drawer
100% Paper
Recyclable
Inner Card
100% Paper
Recyclable
Inner Tray
100% Paper
Recyclable
Soap Home
Paper Recycling
Remove paper pulp tray from the outer carton. Break down the carton by tearing each standing corner so that it lies completely flat. Place both, the tray and carton, in normal curbside paper recycling.
Set Carton
100% FSC-certified
Paper Tray
100% Paper Interior Tray
Software Update
1. Paper Recycling
Break down the outer carton by laying completely flat. Place in normal curbside paper recycling.
2. Plastic Recycling
Place your bottle and cap into normal curbside plastic recycling. Since the entire packaging component is made up of one material (including the airless pump), there is no need to disassemble.
Cap
100% PP plastic
Bottle
100% PP plastic
Pump
100% PP plastic
Carton
100% FSC-certified outer carton
Theraplush™
1. Paper Recycling
Remove paper pulp tray from the outer carton. Break down the carton by tearing each standing corner so that it lies completely flat. Place both, the tray and carton, in normal curbside paper recycling.
2. Plastic Recycling
Once emptied, rinse the Single Refill Pod with water and place in normal curbside plastic recycling.
3. Non-recyclable
Remove and discard of the foil seal from your refill pod. The Reusable Outer Case was designed for a long, refillable life. Order a new Single Refill Pod to reinstall in your dispenser, and continue on your hand care journey.
Set Carton
100% FSC-certified
Paper Tray
100% Paper Interior Tray
Refill Carton
100% FSC-certified
Pod
100% Polypropylene Pod
Foil Seal
5-layer (PET, LDPE, aluminum, HPC, LLDPE)